Pages

Saturday, June 18, 2011

Art Work In Process Post 5

Is anyone still with me?

 I may save these blogs and put them on a CDR for my youngest grandson who aspires to be an artist, or a chef, or a baseball player.  He might enjoy looking at it someday and see how his Grandma Merikay made things.

But for now, I write for you.

Today I did a few "odds and ends."   Steps that only take a short time each, but must be done.

I use PVC pipe couplings to make the horns and antlers removable.

  I make them removable so they can be packed along  side the heads for shipping.  This makes it possible to use a  smaller box size and thus save on shipping costs.  Economical International shipping is  restricted by box size. 


I marked where I wanted the PVC couplings to be, cut thru the paper mache shell with a knife, and used a large drill to bore holes in the foam. I used glue and paper mache to set the couplings in place.

Yesterday I applied a layer of plaster cloth to the moose antlers.  The next material coating is a layer of Hydrocal, a white gypsum cement.

But because it is the same white as the plaster cloth it is difficult to see what I am doing.  To solve this, I paint the plaster cloth layer.  That way I will know that when I can no longer see any paint I have put on a thick enough layer of Hydrocal and have not missed any little places.

Everybody got some attention today! I started building the warthogs tusks.

I inserted a piece of 16 gage wire into the sides of his muzzle.  The "stick" in the center is a bamboo BBQ skewer, and it is keeping the wire in place.

Then I shaped the tusk with aluminum foil and masking tape.


I added a few layers of plaster cloth.












I also made the cheetah's nose today.

I use Sculpty III Clay for his nose.  It was shaped and then baked in a 265* oven to harden.
 I wrapped foil around the muzzle before adding the clay so the nose would be easy to remove after shaping.

I just lift the foil and transfer the nose to a baking sheet.

Later in the day I painted the black clay nose with black paint black.  I also painted the deer's nose which I had made on Tuesday.

I didn't help Craig today, maybe tomorrow.

I think Post 6 will cover furring the cheetah.

8 comments:

  1. I'm still here and enjoying every post!

    ReplyDelete
  2. So, how did you get into making these? Maybe you posted about it and I missed it.

    ReplyDelete
  3. I'm still hanging in there. It's all very interesting. :)

    ReplyDelete
  4. I'm still with you--I just don't have WiFi often. Interesting process!

    ReplyDelete
  5. Merikay

    I think this is all so fascinating, Thanks for sharing your secrets. If you ever decide to do a small gecko, I'm in for one.

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. Hanging on every post! Loving this process..

    ReplyDelete
  8. The process is fascinating. I'm keeping up, waiting patiently for the finale.

    ReplyDelete

Leave a comment, or send an email.